You are here: Home > Electrical > DC-DC Converters

Sort By:
Page of 1
Newmar Isolated Series DC-DC Converters Newmar Isolated Series DC-DC Converters

Newmar Isolated DC-DC Converters

Newmar Standard Series DC-DC Converters Newmar Standard Series DC-DC Converters

Newmar Standard DC-DC Converters

   
 
DC - DC Converters:
Standard & Isolated Series Standard Series Convert 20-50 VDC to 12 or 24 VDC output for powering communication/ navigation equipment, on negative ground systems. (see Isolated series, below for positive ground applications.) Ideal for powering voice, data and navigation transceivers in mobile and marine applications.

• Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within rating.

• Heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and long life of components.

• Polyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum case with heavy duty shock mounts assure survival in hostile environments.

• Numerous converter and load protection circuits: Current limiting*; automatic thermal shutdown; short circuit proof*; reverse polarity and overvoltage protection*.

• Carries the CE mark Isolated series Same features as Standard Series, but with the additional capability of permitting connection of negative ground gear to positive or floating ground battery systems, or vice-versa. Many models may also be used as 12 or 24 volt stabilizers for highly input voltage sensitive equipment.

* Except 3 Amp. Model.

Performance Specifications – Standard & Isolated Series
Output: 13.6 VDC (internally adjustable 12.6-14.5) or 24.5 VDC (or specify)
- except 24-12-3

Ripple:
150 mV P-P maximum

Regulation:
Standard: 1% Line/Load
Isolated: 2% Line/Load
except † 3% Line/Load

Duty Cycle Ratings*
Intermittent - 20 minutes max on time, 20% duty. Current limit set at approx. 105% of intermittent rating
Continuous - 24 hours, 100% duty

Idle Current:
Standard Series: Less than 100 mA (including power “ON” light )
Isolated Series: approx. 50 mA

Operating Temp: 0-50° C, Derate Linearly From 100% @ 40° C to 50% @ 50° C Thermal shutdown @ 70° C Case Temperature
Model 24-12-3I: Full Output -25° C to +30° C; Derate linearly from 100% @ +30° C to 45% @ +50° C

Switching Frequency:
Standard: 40 Khz**
Isolated: 70Khz

Efficiency: 85% - Typical.

Isolation:
Output/Chassis; Input/chassis: 250 VDC
Input/Output: 250 VDC (Isolated Series only)

Certification: Carries the CE mark (Standard Series only)