Hi-Amp Flush Mount Circuit Breaker – Select Amp Rating


Hi-Amp Flush Mount Circuit Breaker

  • *Select Amp Rating (See note below)

SKU: CP-HACB285 Category:


Hi-Amp Flush Mount Circuit Breaker – Up to 150 Amp Rating

This high-amp flush mount circuit breaker provides a great way to protect the entire length of cable, and have the ability to switch off the power.

Use one Hi-Amp Flush Mount Circuit Breaker on each main branch circuit to protect the main feed cables on their way to the battery switch. Also, use battery terminal fuse holder on your main DC distribution bus to protect the cables for your alternator, inverter, solar controller, and more.

  • Flush (surface) mount with push-to-trip button
  • 42 Vdc
  • Weatherproof
  • Marine rated
  • M6 threaded studs
  • Stainless steel hardware installed
  • Ignition Protected
  • Select amp rating above
    • About marine cable and current ratings:
      • Our cable size selections are based on marine boat cable rated for 105 degrees Celsius in bundles of up to three current-carrying conductors, and are listed for convenience only.
      • “Cool” applies to cables that do not run through engine spaces (mains or generator)
      • “Hot” applies to cables that terminate in, or pass through, engine spaces
      • If “Cool” or “Hot” is not specified, the cable is rated for the fuse listed
      • It is acceptable to use circuit breaker with a lower rating than the cable is rated for
      • Refer to ABYC E-11, “AC and DC Electrical Systems on Boats” or contact a qualified marine electrician

Additional information

Weight.5 lbs
Dimensions6 × 6 × 6 in


There are no reviews yet.

Be the first to review “Hi-Amp Flush Mount Circuit Breaker – Select Amp Rating”

Your email address will not be published. Required fields are marked *