Description
Hi-Amp Panel Mount Circuit Breaker – Up to 150 Amp Rating
This high-amp panel mount circuit breaker provides a great way to protect the entire length of cable, and have the ability to switch off the power.
Use one Hi-Amp Panel Mount Circuit Breaker on each main branch circuit to protect the main feed cables on their way to the battery switch. Also, use battery terminal fuse holder on your main DC distribution bus to protect the cables for your alternator, inverter, solar controller, and more.
- Panel mount with push-to-trip button
- 42 Vdc
- Weatherproof
- Marine rated
- M6 threaded studs
- Stainless steel hardware installed
- Ignition Protected
- Select amp rating above
- About marine cable and current ratings:
- Our cable size selections are based on marine boat cable rated for 105 degrees Celsius in bundles of up to three current-carrying conductors, and are listed for convenience only.
- “Cool” applies to cables that do not run through engine spaces (mains or generator)
- “Hot” applies to cables that terminate in, or pass through, engine spaces
- If “Cool” or “Hot” is not specified, the cable is rated for the fuse listed
- It is acceptable to use circuit breaker with a lower rating than the cable is rated for
- Refer to ABYC E-11, “AC and DC Electrical Systems on Boats” or contact a qualified marine electrician
- About marine cable and current ratings:
Reviews
There are no reviews yet.