Our Victron lithium-iron-phosphate Smart Lithium LiFePO4 Marine Battery, 25.6 Volt (for 24 or 48 volt systems), 100 Amp-Hour, is roughly the size of a group 4D 12V marine battery, but offers more capacity and much lower weight.
Lithium-iron-phosphate (LiFePO4 or LFP) is the safest of the mainstream li-ion battery types. The nominal voltage of a LFP cell is 3,2V (lead-acid: 2V/cell). A 12,8V LFP battery therefore consists of 4 cells connected in series; and a 25,6V battery consists of 8 cells connected in series.
A lead-acid battery will fail prematurely due to sulfation:
- If it operates in deficit mode during long periods of time (i.e. if the battery is rarely, or never at all, fully charged).
- If it is left partially charged or worse, fully discharged (yacht or mobile home during wintertime).
A LFP battery does not need to be fully charged. Service life even slightly improves in case of partial charge instead of a full charge. This is a major advantage of LFP compared to lead-acid. Other advantages are the wide operating temperature range, excellent cycling performance, low internal resistance and high efficiency.
LFP is therefore the chemistry of choice for demanding applications.
In several applications (especially off-grid solar and/or wind), energy efficiency can be of crucial importance. The round-trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of the average lead-acid battery is 80%. The round-trip energy efficiency of a LFP battery is 92%. The charge process of lead-acid batteries becomes particularly inefficient when the 80% state of charge has been reached, resulting in efficiencies of 50% or even less in solar systems where several days of reserve energy is required (battery operating in 70% to 100% charged state). In contrast, a LFP battery will still achieve 90% efficiency under shallow discharge conditions.
Size and weight:
Saves up to 70% in space, Saves up to 70% in weight
LFP batteries are expensive when compared to lead-acid. But in demanding applications, the high initial cost will be more than compensated by longer service life, superior reliability and excellent efficiency.
With Bluetooth cell voltages, temperature and alarm status can be monitored. Very useful to localize a (potential) problem, such as cell imbalance.
- Nominal Voltage – 25.6 VDC (for 24 or 48 volt systems)
- Nominal Capacity (25 deg C) – 100 Amp-hour (at discharge <= 1x Cap)
- Nominal Energy (25 deg C) – 2560 Wh
- Max Continuous Discharge – 200 Amps
- Recommended Continuous Discharge – <= 100 Amps
- Max Charge Current – 200 Amps
- Recommended Charge Current – <= 50 Amps
- 7-3/4 H x 25-5/8 L x 6-1/2 W, 62 Lbs